FRONT SPOILER Complete G80/82-M3/M4

LAPTORR FRONT SPOILER/COMPLETE
For G80/82-M3/M4

A front spoiler with excellent front aerodynamics has been completed.
AERODYNAMICS AND FUNCTIONALITY WERE TAKEN INTO CONSIDERATION IN THE DESIGN, WHICH WAS A JOINT WORK WITH "DOME", AND THE PRODUCTION WAS FINISHED INTO CARBON PRODUCTS BY THE INFUSION METHOD AT LAPTORR'S AFFILIATED FACTORY.

Combination according to applicationIt consists of four spoilers to choose from.
　

Base Spoiler
The stock design is balanced while increasing the amount of forward thrust for greater downforce.
Both ends are shaped to reduce drag on the tires, while the center section is shaped for cooling and rearward rectification.
Solo mounting is possible.
There are two types of base spoilers
Base 1 is without holes for mounting extensions on the underside of the spoiler tip, and Base 2 is with holes.
Base 1
Base 1 is available for those who do not wish to install extensions and are concerned about the appearance of the mounting holes on the underside of the spoiler tip. Please note that extensions cannot be additionally attached.
Base 2
There is a mounting hole in the lower front for connection to the extension spoiler.
Therefore, its mounting hole may be visible when mounted alone.
We recommend the versatile Base 2 for those who do not have any visual problems without extensions.

　

　
　
Extension spoiler
The forward projection of the base spoiler is further increased in the extension spoiler to maximize the area for downforce.
Connected flat to the under spoiler to increase downforce.
The central shape of the tip minimizes downforce fluctuations due to changes in body attitude and contributes to cooling of the engine oil cooler, transmission, and differential.
A base spoiler is always required to install the extension spoiler.

　
　
　
Side spoiler
Airflow from the grills at both bumper ends is directed by the side spoilers through the outside of the tires to cool the wheelhouse and rectify the airflow to the rear.
Effective when wide tires protrude from the bumper.
Can be worn alone.


　 
　
　
under spoiler
It is the main source of downforce.
The area is made as large as possible to generate large downforce.
Therefore, the thickness of the carbon is increased to ensure strength to withstand the downforce.
The shape allows smooth discharge from the engine oil cooler, contributing to cooling.
The under spoiler cannot be installed alone.
Always require base and extension spoilers.

　
　
　

Examples of coloring images


 

 
 
 

Go to price/purchase page